Analytical Instruments

MT 40.10The disposable grinding chamber with a stainless steel beater reduces soft, medium, hard and brittle materials with a Mohs hardness of up to 5...

M 20.1 Grinding chamberA second grinding chamber ensures effective processing. The grinding chambers can be placed on the drive alternately. One chamber is cleaned and...

M 22 Hard metal cutterFor hard materials up to Mohs hardness 9. Material tungsten carbide (86,5 WC 13,5 Col)Note: For all International Orders, the buyer...

The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used...

A 11.6 Double beaterFor use up to Mohs hardness 3. Only applicable with grinding chamber A 11.4. Not included with the analytical mill A 11...

M 21 Spare cutter, stainless steelSuitable for crushing materials up to Mohs hardness 5. Included with M 20. Material stainl. steel (1.4122)Note: For all International...

A 11.7 FunnelPrevents splashing by pouring in liquid nitrogen in the grinding chamber A 11.5. Material jacket: PTFE Material sieve: stainl. steel (AISI 316L) Not...

A 11.5 Spare grinding chamber Made of Tefcel (ETFE, glass fibre-reinforced) with stainless steel inlet (AISI 316L). Excellent resistance to chemicals and low temperatures (-...

A 11.3 BeaterFor pulverizing substances with a Mohs hardness up to 9, stainless steel coated with chromium carbide. Not included with the analytical mill A...

MF 4.0Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 4.0 mm stainl. steel (AISI 304)Note: For all...

MF 3.0Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 3.0 mm stainl. steel (AISI 304)Note: For all...

MF 2.0Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 2.0 mm stainl. steel (AISI 304)Note: For all...

MF 1.0Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 1.0 mm stainl. steel (AISI 304)Note: For all...

MF 0.5Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 0.5 mm stainl. steel (AISI 304)Note: For all...

MF 0.25Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 0.25 mm stainl. steel (AISI 304)*Note: For all...

A 11.2 Cutting bladeFor pulverizing soft, fibrous grinding materials. Not included with the analytical mill A 11 basic. Material: stainl. steel (AISI 440B)Note: For all...

A 11.1 Spare beaterFor pulverizing substances with a Mohs hardness up to 6. Included with the analytical mill A 11 basic. Material: stainl. steel (AISI...

A 11.4 Grinding chamberMade of polycarbonate with stainless steel inlet (AlSl 316L). Not suitable for cooling with N2, only applicable with double beater A 11.6....

Includes A 11.1 spare beaterBatch mill for 2 different grinding procedures:Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This...

MF 10.2 Impact grinding headFor crushing brittle, hard materials such as minerals, building materials up to Mohs hardness 6. Before being discharged, the ground material...

MF 10.1 Cutting-grinding headFor crushing fibrous substances such as paper and vegetation, but also for plastics and material with a low volume weight. Before being...

Continuously operating universal grinder with a speed range of 3,000 - 6,500 rpm. Powerful drive Easy to clean working surface made of stainless steel Two...

IKA MultiDrive BL 2000 TBL 2000 T is a vessel with mixing knife and temperature sensor, which is particularly useful in combination with IKA MultiDrive...

IKA MultiDrive BL 2000BL 2000 is a vessel with mixing knife and is particularly useful in combination with IKA MultiDrive basic for wet grinding of...

IKA MultiDrive DI 2000 TDI 2000 T is a vessel with rotor-stator system and temperature sensor, which is particularly useful in combination with IKA MultiDrive...

Multidrive ControlNote: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the package.

Regardless of whether samples are hard, soft or fibrous - the IKA MultiDrive crusher can perform a wide range of crushing tasks involving coarse and...

Includes A 10.1 stainless steel cutter, A 10.4 grinding chamber reduction Digital timer Counter: Display of grinding time Interval function Brushless motor for long service...