Minisart Air with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. Type 16596HNK with a pore size of 0.2 µm can be used for sterile filtration. It has an outlet with needle. Version HNK is individually packed and sterilized by ethylene oxide (EO).
Individually packed and sterile Minisart Air syringe filters are optimal for immediate usage whenever sterile filtration or venting is needed. The low-binding PTFE membrane is the best option for leachable free filtration. Due to its hydrophobic nature the PTFE membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates and passes the plastic class VI test. Housing and membrane are tightly connected which allows bidirectional use.
- Sterile and ready-to-use
- Minimum extractables or leachables
- Very low non-specific binding
- Suitable as venting filter
Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the package.
Applications
- Sterile Filtration
- Venting / Moisture Barrier
Specifications
- Connector Inlet: Female Luer Lock
- Connector Outlet: Needle (38 × 1.7 mm)
- Filter Diameter: ⌀ 15 mm
- Filtration Area: 1.7 cm²
- Housing Dimensions: 25 × 72 mm
- High Flow: No
- Filter Paper/Membrane Color: Yellow
- Flow Rate: 2000 mL/min with air at 0.1 bar (1.5 psi)
- Maximum Allowable Back Pressure: 0.3 bar (4.4 psi) at 20°C
- Total Throughput: Up to 100 mL
- pH Range: 3.0 – 12.0
- Housing Material: Acrylic-based multipolymer compound (MBS)
- Membrane Material: Polytetrafluorethylene (PTFE)
- Maximum Allowable Working Temperature: 60 °C (140 °F)
- Maximum Inlet Pressure: 3.0 bar (44 psi)
- Maximum Operating Pressure: 4.5 bar (65 psi)
- Operating Pressure: 4.5 bar (65 psi)
- Bubble Point: Min. value with water 0.9 bar (13 psi)
- Burst Pressure: Min. value 7.0 bar (102 psi)
- Non-Fiber Releasing: This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
- Pore Size: 0.2 µm
- Wettability: Hydrophilic
- Device Type: Syringe Filters
- Sample Type: Air/Gas, Oils and alkanes according to chemical compatibility
- Sterilization Method: Ethylene Oxide
- Delivery Condition: Ethylene Oxide
- Hold-up Volume: 230 µL before bubble point
Documents
€{{amount_with_comma_separator}}