Minisart RC with hydrophilic regenerated cellulose (RC) is optimized for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. Type 17821 with a pore size of 0.2 µm can be used for sample preparation and has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
Non-sterile Minisart RC syringe filters are supplied in a pouch in one pack. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The RC membrane is the best option for reliable and leachable free filtration. The very low non-specific binding characteristics of this membrane makes it a perfect choice for aqueous samples and solvents. In addition, unlike PVDF filters, those with RC membranes are suitable for DMSO and other amides, or for ketones, esters, and ethers. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.
- A pouch in one pack for less waste
- Minimum extractables or leachables
- Very low non-specific binding
- Outperforming chemical compatibility
Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the package.
Applications
- Analytical Sample Preparation
- Clarification
Specifications
- Connector Inlet: Female Luer Lock
- Connector Outlet: Male Luer Slip
- Filter Diameter: ⌀ 4 mm
- Filtration Area: 0.1 cm²
- Housing Dimensions: 12 × 20 mm
- High Flow: No
- Filter Paper/Membrane Color: White (opaque)
- Flow Rate: 4.5 mL/min with methanol at 1 bar (14.5 psi) | 60 mL/min with air at 0.1 bar (1.5 psi)
- Total Throughput: Up to 1 mL
- pH Range: 1.0 – 14.0
- Housing Material: Polypropylene (PP)
- Membrane Material: Polyamide (PA)
- Maximum Allowable Working Temperature: 121 °C (250 °F)
- Maximum Inlet Pressure: 4.5 bar (65 psi)
- Maximum Operating Pressure: 4.5 bar (65 psi)
- Operating Pressure: 4.5 bar (65 psi)
- Bubble Point: Min. value with water 3.2 bar (46 psi)
- Burst Pressure: Min. value 7.0 bar (102 psi)
- Non-Fiber Releasing: This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
- Pore Size: 0.45 µm
- Wettability: Hydrophilic
- Device Type: Syringe Filters
- Sample Type: Aqueous, Solvents, Harsh liquids according to chemical compatibility
- Sterilization Method: Ethylene Oxide, Autoclave
- Delivery Condition: Non-Sterile
- Sterilization Procedures: Ethylene oxide, Autoclave, 121°C, 30 min
- Hold-up Volume: 5 – 10 µL before bubble point
Documents