Minisart PES with polyethersulfone (PES) is optimal for highest flow rates and a pH of 2 - 13. Type 1776D with a pore size of 0.22 µm can be used for sterile filtration and has a male luer slip outlet. Version ACK is individually packed and sterilized by ethylene oxide (EO).
Individually packed and sterile Minisart PES syringe filters are optimal for immediate usage whenever sterile filtration or clarification and cell removal under sterile conditions is needed. Due to the slightly asymmetric membrane structure, the PES surface almost behaves like a pre-filter and enables highest flow rates. The low binding membrane is tightly connected with the housing which allows bidirectional use. The housing is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.
- Sterile and ready-to-use
- Slightly asymmetric PES with superior flow rate
- Low non-specific binding
- Bidirectional use possible
Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the package.
Applications
- Sterile Filtration
- Clarification
Specifications
- Connector Inlet: Female Luer Lock
- Connector Outlet: Male Luer Slip
- Filter Diameter: ⌀ 15 mm
- Filtration Area: 1.7 cm²
- Housing Dimensions: 25 × 23 mm
- High Flow: No
- Filter Paper/Membrane Color: White (opaque)
- Flow Rate: 40 mL/min with water at 1 bar (14.5 psi)
- Total Throughput: Up to 15 mL
- pH Range: 3.0 – 14.0
- Housing Material: Polypropylene (PP)
- Membrane Material: Polyamide (PA)
- Maximum Allowable Working Temperature: 121 °C (250 °F)
- Maximum Inlet Pressure: 4.5 bar (65 psi)
- Maximum Operating Pressure: 4.5 bar (65 psi)
- Operating Pressure: 4.5 bar (65 psi)
- Bubble Point: Min. value with water 3.2 bar (46 psi)
- Burst Pressure: Min. value 7.0 bar (102 psi)
- Non-Fiber Releasing: This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
- Pore Size: 0.2 µm
- Wettability: Hydrophilic
- Device Type: Syringe Filters
- Sample Type: Aqueous, Solvents, Harsh liquids according to chemical compatibility
- Sterilization Method: Ethylene Oxide
- Delivery Condition: Sterile
- Sterilization Procedures: Ethylene oxide#
- Hold-up Volume: 30 – 100 µL before bubble point
Documents