Minisart NY with hydrophilic polyamide (nylon) is optimized for aqueous liquids and solvents with a pH of 3 - 14. Type 1776C with a pore size of 0.45 µm can be used for sample preparation. It has a male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by autoclaving or EO.
Non-sterile Minisart NY syringe filters are supplied in a pouch in one pack. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The polyamide membrane combines fastest flow with low non-specific binding. Sartorius polyamide is exceptionally pure compared with other common hydrophilic nylon filters. Competitor nylon membranes are using raw materials which are especially interfere with LC | MS. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases.
- A pouch in one pack for less waste
- Minimum extractables or leachables
- Very low non-specific binding
- Outperforming chemical compatibility
Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the package.
Applications
- Analytical Sample Preparation
- Clarification
Specifications
- Connector Inlet: Female Luer Lock
- Connector Outlet: Male Luer Slip
- Filter Diameter: ⌀ 15 mm
- Filtration Area: 1.7 cm²
- Housing Dimensions: 25 × 23 mm
- High Flow: No
- Filter Paper/Membrane Color: White (opaque)
- Flow Rate: 40 mL/min with water at 1 bar (14.5 psi) | 110 mL/min with methanol at 1 bar (14.5 psi)
- Total Throughput: Up to 15 mL
- pH Range: 3.0 – 14.0
- Housing Material: Polypropylene (PP)
- Membrane Material: Polyamide (PA)
- Maximum Allowable Working Temperature: 121 °C (250 °F)
- Maximum Inlet Pressure: 4.5 bar (65 psi)
- Maximum Operating Pressure: 4.5 bar (65 psi)
- Operating Pressure: 4.5 bar (65 psi)
- Bubble Point: Min. value with water 2.0 bar (44 psi)
- Burst Pressure: Min. value 7.0 bar (102 psi)
- Non-Fiber Releasing: This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
- Pore Size: 0.45 µm
- Wettability: Hydrophilic
- Device Type: Syringe Filters
- Sample Type: Aqueous, Solvents, Harsh liquids according to chemical compatibility
- Sterilization Method: Ethylene Oxide, Gamma irradiation, Autoclave
- Delivery Condition: Non-Sterile
- Sterilization Procedures: Ethylene oxide, Autoclave, 121°C, 30 min
- Hold-up Volume: 30 – 100 µL before bubble point
Documents