Minisart PES with hydrophobic polyethersulfone (PES) is suitable for venting or filtration of gases and air. Type 1757H with a pore size of 0.2 µm can be used for sterile filtration and has male luer slip outlet. Version K is a non-sterile pack of 50. Units can be sterilized by gamma irradiation, autoclaving or EO.
Non-sterile Minisart PES- syringe filters are supplied in a pouch in one pack. This reduces waste and makes the handling easier whenever the application allows venting under non-sterile conditions. In addition the non-sterile filters can be assembled and sterilised by the user. The hydrophobic PES membrane functions as a water barrier and does not become wetted by aerosols. This keeps the hydrophobic venting filter permeable for gas or air! The housing of the filter is made of gamma-sterilisable PP (polypropylene) which is compatibility with harsh gases.
Non-sterile filters for assembly
High chemical compatibility
Suitable as venting filter
Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the package.
Venting / Moisture Barrier
Connector Inlet: Female Luer Lock
Connector Outlet: Male Luer Slip
Filter Diameter: ⌀ 25 mm
Filtration Area: 4.8 cm²
Housing Dimensions: 33 × 23 mm
High Flow: No
Filter Paper/Membrane Color: White (opaque)
Flow Rate: 1200 mL/min with air at 0.1 bar (1.5 psi)
Total Throughput: Up to 100 mL
pH Range: 3.0 – 14.0
Housing Material: Polypropylene (PP)
Maximum Allowable Working Temperature: 121 °C (250 °F)
Maximum Inlet Pressure: 4.5 bar (65 psi)
Maximum Operating Pressure: 4.5 bar (65 psi)
Operating Pressure: 4.5 bar (65 psi)
Bubble Point: Min. value with ethanol 0.95 bar (14 psi)
Burst Pressure: Min. value 7.0 bar (102 psi)
Non-Fiber Releasing: This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Pore Size: 0.2 µm
Device Type: Syringe Filters
Sample Type: Air/Gas, Solvents according to chemical compatibility