My Cart 0
Ohaus Incubating Microplate Shaker with Opaque Lid Lab Equipment ISLDMPHDGL

Ohaus Incubating Microplate Shaker with Opaque Lid Lab Equipment ISLDMPHDGL


Free Shipping within the 48 contiguous united states

  • $2,250.00
  • Save $427

Incubating Light Duty Orbital Shakers

LED displays for temperature, speed and time Timer with audible alarm

Available with opaque lid for light sensitive samples The OHAUS Incubating Microplate Shakers are optimized for shaking microplates,

deep-well plates, or micro-tubes.

Operating Features:

Microprocessor Control: The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-point and will restart if power is interrupted.
PID Temperature Controller: Maintains precise temperature control from ambient +5°C to 65°C. Easy-to-use controls allow users to adjust temperature in 1°C increments.

Triple Eccentric Drive: Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation. LED Display: Touch pad controls with easy-to-read, independent LED displays for temperature, speed, and time allow operator to view all settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time or, when programmed to user de ned limit, will shut o unit when time reaches zero. Display will show last used settings, even after power has been turned o .

Temperature Calibration Mode: Allows user to calibrate unit to an external temperature device.

Safety Features:

Overload Protection: Audible and visual signals will activate when system detects an obstruction or overload of the tray.
Speed Ramping Feature: Slowly increases speed to desired set-point to avoid splashing.

Audible Alarm: In timed mode, alarm will sound when the time reaches zero. Caution Hot Indicator: Symbol illuminates when the temperature of the air in the chamber reaches 40°C and remains lit until temperature cools down. Spill-Resistant Design: Channels uids away from internal components. Polycarbonate Lid: Clear lid permits viewing of samples without disturbing internal temperature. Opaque lid prohibits light exposure to light sensitive samples.

Operating Conditions:

Unit can be run in conditions from 5 to 40°C (41 to 104°F), maximum 80% relative humidity, non-condensing.


Immunoassays and hybridizations.

Ordering Information:

Units include a detachable, 3-wire cord and plug


Temperature Range

Ambient +5°C to 65°C

Temperature Uniformity

± 0.5°C at 37°C

Speed Range

100 to 1200 rpm

Speed Accuracy

± 2%


1 second to 160 hours


3 mm (0.12")

Maximum Weight Capacity

4 microplates or
2 micro-tube racks

Tray Material


Tray Dimensions (L × W)

11 × 7.75" (27.9 × 19.7 cm)

Overall Dimensions (L × W × H)

17 × 11 × 7.75"
(43.2 × 27.9 × 19.7 cm)


Have a Question?

Be the first to ask a question about this.

Ask a Question


Sold Out