My Cart 0
Foredom SR Hang-Up Motor Metal Speed Control M.SR-SCT Choice of Handpiece

Foredom SR Hang-Up Motor Metal Speed Control M.SR-SCT Choice of Handpiece


Handling 7-10 business days

  • $357.76

Use Product Options to Select Handpiece: K.8302 has H.30 Handpiece, K.8310 has H.44T Handpiece, K.8311 has H.8 Handpiece, K.8313 has H.20 Handpiece and K.8322 has H.43T Handpiece.

Flex Shaft Tool Sets include popular combinations of motors, speed controls, and handpieces - the three key components of a complete flexible shaft machine. Unlike our Pre-Packed Kits, they do NOT come with any accessory assortments, but do include a tube of grease. The K.8301 and K.8301-2 (230 Volt version) are the only sets that come packed in a printed box. All other sets come packed in a white box.
Motor and Speed Control carry a 2 Year Limited Warranty.
1. Series SR Motor:

Foredom's most popular and best motor for general use. The 1/6 HP, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors - 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging and our standard 39" long key tip inner shaft and outer sheath for connecting to any of Foredoms interchangeable handpieces.

2. C.SCT Speed Control:
Offers the same electronics and smooth control as the C.FCT but in a much heavier, cast iron housing. The added weight eliminates any unexpected movement of the control along the floor. The bottom surface of the speed control is covered with non-skid material. CSA listed.

3. Flexible shaft grease

4. Handpiece-
All are members of Foredom's system of interchangeable handpieces:
* H.30 Handpiece:
Foredom's most popular general purpose handpiece features a 3-jaw, geared chuck with a 0-5/32" capacity. Accessory changes are easy with this handpiece using the supplied HPCK-0 Chuck Key.
* H.44T Handpiece:
Collet style handpiece is popular among woodcarvers as it accommodates larger accessories with shank diameters up to 1/4". It comes with 3/32", 1/8" and 1/4" collets. The tapered design allows for close and safe work.
* H.8 Handpiece:
H.8 is a slim collet type handpiece with pre-lubricated ball bearings that require no additional lubrication. It has a chuck guard that slides back when changing burs. Comes with 3/32" and 1/8" collets and chuck wrenches for changing collets and accessories.
* H.20 Handpiece:
H.20 Handpiece is a quick change handpiece for exclusive use with 2.35mm (3/32") shank burs. Has molded plastic grip and lever action.
H.43T Handpiece:

H.43T is a shorter version of the H.44T and accepts accessories with up to 1/4" diameter shanks. Has pre-lubricated ball bearings that require no additional lubrication. Comes with 3/32", 1/8" and 1/4" collets, pin and wrench for changing collets and accessories.


Have a Question?

Be the first to ask a question about this.

Ask a Question


Sold Out