Foredom K.1055 Dual Handpiece Brushless Kit, 2.35mm (3/32") or 1/8" Collet Rotary Brushless AND Chuck Style Brush Type

Overall Product Features-

Two Year Limited Warranty

Brushless motor design carbon brushes NEVER need changing

Maximum Torque or Watts Output 10 oz. in or 70mNm or 230W. Powerful even at minimum speeds

Sealed housing eliminates dust, noise, and vibration

Additional port for Brush Type Micromotor Handpiece:

This brushless micromotor is ideal for various applications at high, medium and low speed.

• High Speed Applications: Running at high speed, it provides smooth, clean, and sharp detailing in metal and wood. It's also great for bright-cutting, grinding, finishing, texturing, and polishing. You never need to changes the brushes on this handpiece.

• Medium Speed Applications: At medium speeds it is ideal for effortless and fast stock removal in wood, diestone, or acrylics.

• Low Speed Applications: The low end offers extra control and power for stone setting and milling.

HP4-817 Control Box and Front Panel LED Specifications and Features-

50/60 Hz, 100VA, 5.4" wide, 9.1" deep, 7" high

Dial speed control sets precise speed and torque

Auto cruise, Forward or Reverse rotation, Dial or Foot speed control

Digital display for precise speed and torque settings

Built in overload protection

Brushless micromotor handpiece connects to port on back side of control box

Brush-type handpiece connects to port in front.

H.MH-150 Brushless Handpiece/Motor Specifications and Features -

6.3" long, 1.06" motor diameter, .75" grip diameter, 8.4 oz/237.7 gr., 115 volt

Ergonomic and brushless with long-lasting ceramic ball bearings

Simple bur changes twist to release and lock in bur

Comes with either 2.35mm (3/32") or 1/8" collet installed.

H.MH-120 Brush type High Torque/Chuck Style Handpiece/Motor Specifications and Features -

H.MH-120 features extra power and a geared 3-jaw #0 chuck that takes any size rotary accessory or drill bit with shanks up to 5/32" (4mm) diameter. Used for deburring cast pieces, polishing, taking down weld seams, and moderate to heavy grinding and rapid stock removal in metal and wood. It comes with a chuck key in molded plastic handle.

Comes supplied in Kit K.1020 and works with the same HP4-917 Control Unit that comes with Micromotor Kits K.1070, K.1080 and K.1090.

2 year warranty