Minisart NML Plus with glass fibre filter is optimized for particle-laden aqueous solutions or oils for a higher total throughput. Type 17824 with a particle retention of 0.7 µm can be used for clarification and has a male luer lock outlet. Version K is a non-sterile pack of 50. Units can be sterilized by gamma irradiation or EO.
Non-sterile Minisart NML Plus syringe filters are supplied in a pouch in one pack. This reduces waste and makes the handling easier whenever the application allows the removal of particles or cells from highly particle-laden liquids under non-sterile conditions. The glass fibre prefilter protects the membrane from early clogging and increases total throughput. The very low non-specific binding characteristics of the SFCA membrane makes the filters a perfect choice for biomolecule solutions. The housing is made of the acrylic resin MBS (Methacrylate butadiene styrene) which has a limited compatibility with alcohols but is free of phthalates. It is glueable, e.g. to tubing, what enables assembly and sterilization by the user. GF and membrane in one filter housing decrease the hold-up volume. If this is no limiting factor a GF-only version is available and can be coupled with a membrane-only syringe filter of choice.
- A pouch in one pack for less waste
- GF-prefilter for higher total throughout
- Very low non-specific binding
- PVC-free
Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the package.
Applications
Specifications
- Connector Inlet: Female Luer Lock
- Connector Outlet: Male Luer Slip
- Filter Diameter: ⌀ 28 mm
- Filtration Area: 6.2 cm²
- Housing Dimensions: 33 × 24 mm
- High Flow: No
- Filter Paper/Membrane Color: White
- Flow Rate: 450 mL/min with water at 1 bar (14.5 psi)
- Total Throughput: Up to 200 mL
- pH Range: 4.0 – 8.0
- Housing Material: Acrylic-based multipolymer compound (MBS)
- Material Prefilters: Glass Fiber (GF)
- Membrane Material: Glass Fiber (GF)
- Maximum Allowable Working Temperature: 60 °C (140 °F)
- Maximum Operating Pressure: 4.5 bar (65 psi)
- Operating Pressure: 4.5 bar (65 psi)
- Bubble Point: Min. value with water 0.5 bar (7 psi)
- Burst Pressure: Min. value 7.0 bar (102 psi)
- Pore Size: 0.7 µm
- Retention Rate: 0.7 µm²
- Wettability: Hydrophilic
- Device Type: Syringe Filters
- Sample Type: Aqueous, Oils and alkanes according to chemical compatibility
- Sterilization Method: Ethylene Oxide, Gamma irradiation
- Delivery Condition: Non-Sterile
- Hold-up Volume: 230 µL before bubble point
Documents