Foredom K.105318 Micromotor Kit, Brushless, 1/8" & Hammer, 230V

Product Specifications

• Weight: 12.6 lbs
• Dimensions: 12 x 10 x 12 in
• Power Plug Option: -2 - N. American, -21 - United Kingdom, -22 - Continental Europe, -26 - Australia

230V Dual Port Kit comes with 2 Handpieces:

• Brushless rotary handpiece connects to port in the back of the control box. It runs virtually vibration free with high torque throughout the entire speed range of 1,000-50,000 rpm. See additional specs below.
• Brush type Hammer handpiece operates at 1,000 - 2,500 strokes per minute. Connects to port in front of the control box. See additional specs below.
• Control box with digital display, variable speed foot pedal, 2 handpiece cradles, and an extra fuse also included. See additional specs below.

Product Features-

• Two Year Limited Warranty
• Brushless motor design carbon brushes NEVER need changing
• Maximum Torque or Watts Output 10 oz. in or 70mNm or 230W. Powerful even at minimum speeds
• Sealed housing eliminates dust, noise, and vibration
• Additional port for Brush Type Micromotor Handpiece:

This brushless micromotor is ideal for various applications at high, medium and low speed.

• High Speed Applications provides smooth, clean, and sharp detailing in metal and wood. It's also great for bright-cutting, grinding, finishing, texturing, and polishing. You never need to changes the brushes on this handpiece.
• Medium Speed is ideal for effortless and fast stock removal in wood, diestone, or acrylics.
• Low Speed offers extra control and power for stone setting and milling.

HP4-817-2 (230V) Control Box and Front Panel LED

• 50/60 Hz, 100VA, 5.4" wide, 9.1" deep, 7" high
• Dial speed control sets precise speed
• Auto cruise, Forward or Reverse rotation, Dial or Foot speed control
• Digital display for precise speed and torque settings
• Built in overload protection
• Brushless micromotor handpiece connects to port on back side of control box
• Brush type handpiece connects to port in front.

H.MH-150 Brushless Handpiece/Motor

• 6.3" long, 1.06" motor diameter, .75" grip diameter, 8.4 oz/237.7 gr., 115 volt
• Ergonomic and brushless with long-lasting ceramic ball bearings
• Bur changes are quick and easy with a simple twist of the front section of the Handpiece
• Comes with either 2.35mm (3/32") or 1/8" collet installed.

H.MH-110 Brush Type Hammer Handpiece/Motor

• 6-1/4" overall length, 9/16" grip diameter, 1" motor diameter, 13oz/369 gr., 1.5 amps (115V) .75 amps (230V)
• Ideal for stone setting applications and engraving techniques.
• Slender contoured grip and impact adjustment ring for precise hammering work.
• Operates from 0-2,500 strokes per minute. The force of the impact of the H.MH-110 reciprocating handpiece can be adjusted from light to full by turning the metal ring while the motor is off or running.
• The speed of the hammer action can also be varied from 0-2,500 strokes per minute with the dial on the control unit.
• Used with the supplied Graver Holder, the handpiece becomes a precision power engraver- no need for an air compressor or a flexible shaft drive.

Handpiece Accessories:

• 3-Anvil Points with Threaded Shanks p/n HP10177
• 1-Graver Holder with Allen Key p/n HPH8-214. Screws into the front end of the handiece and converts it into a power engraving tool. Comes with 5/64" allen key (graver not included).
• 1-5mm Open End Wrench, Handpiece Cradle p/n HP4-933, Spare Motor Brushes p/n HP4-163, 2 Pins used to tighten Anvil Points

HP7-7060 Foot Speed Control

• Variable speed foot control works with control box HP4-717. Varies speed from 1,000 - 50,000 RPM.

Documents

• K.1050 Dual Port Brushless Micromotor Owner's Manual
• MH-150 Micromotor Rotary Handpiece Parts List
• H.MH-110 Hammer Handpiece